Metals & Jewelry
Monday, December 10, 2012
Step 9 and Final Product!
Step 9: Sand the Ring with Sanding Stick with
600 grit Sandpaper. Polish After.
Final Product Size 8 Band Ring!
Step 8: Liver of Sulfur
Step 8: Once Sanded, Place in Fresh Liver
of Sulfur for 5 Minutes.
I repeated this process twice.
Step 7: Sanding and Steel Wool
Step 7: Using the Range of Sandpapers, Sanding the
Exterior and Interior. Followed by Steel Wool.
Step 6: Soldering and Shaping
Step 6: After Soldering, Hammering the Ring
into a Circle around a Ring Mandril
Step 5: Bending
Step 5: Bending the Soldered Band
into a "D" Shape
Step 4: Soldering
Step 4: Soldering. I did not get an image of the
result in a flat piece.
Step 3: Sawing and Piercing
Step 3: Sawing the Edges and Piercing
Step 2: Drilling Areas to be Pierced
Step 2: Drilling Areas in Top and Bottom
Pieces to be Pierced
Project 4: Band Ring Step 1: Design
Step 1: Design and Adhere to 20g and 24g Sterling Silver
Tuesday, November 20, 2012
Washington Craft Show
Tuesday, November 13, 2012
Candle Holder Culture Inspiration : Buddhism
Candle Holder Design Inspiration
Tuesday, October 9, 2012
Final Product!
Cuff Bracelet
After adding patina using a torch
Step 6: Hammer into bracelet shape
Step 5: Finished sawing/ Piercing
Sand/ file edges
Step 4: Sawing/ Piercing
Step 3: Drill holes for areas to be pierced
Step 2: Adhere design to copper
center punch areas to be pierced
Final Product!
Snail Personal Talisman
Step 6: Sanding/ Finishing
Step 5: Piercing/ Sawing Design
Wednesday, October 3, 2012
Natural Patterns/ Textures
Newer Posts
Older Posts
Home
Subscribe to:
Posts (Atom)